60W Passive Poe Injector RJ45 Wi-Fi Adapter for Security Camera Switch Antenna

• Type: Injector
• Transmission Rate: >200Mbps
• Color: Silver
• Certification: ISO9001, RoHS, FCC, CE
• Transport Package: PE Bags
• Trademark: KaiWin
• Model NO.: KWZ248
• Origin: China
• Production Capacity: 100000pieces/Month

Product Description

 

Description:

* Support long distance for data, up to 100meters

* Data and Power passed by the ethernet cable

* Full protection:Overload/Over current/ Over voltage/ Short circuit
 

Product parameters of 60W Wall Mount over Ethernet Adapter POE Injector:
 

Output	Safe type	GRT-480100A	GRT-560110A	GRT-560100A
	Voltage range	48VDC	56VDC	56VDC
	Maximum power	48W	60W	56W
	speed	Gbps	Gbps	Gbps
	IEEE802.3	Non-standard, no active detection	Non-standard, no active detection	Non-standard, no active detection
	Ripple/Noise	480mV p-p	560mVp-p	560mVp-p
	Voltage accuracy	±5.0%	±5.0%	±5.0%
	Linear adjustment rate	±1.0%	±1.0%	±1.0%
	Load adjustment rate	±5.0%	±3.0%	±3.0%
	Start, rise, hold time	2000ms, 50ms, 10ms /230VAC 3000ms, 50ms, 10ms /115VAC (At full load)
Input	Voltage range	90 ~ 264VAC
	Frequency range		47 ~ 63Hz
	efficiency	87%	87%
	Alternating current	0.8A / 115VAC    0.4A / 230VAC
	Inrush current max.	Cold start 40A / 115VAC    75A / 230VAC
	Leakage current max.	0.25mA / 240VAC
Protect	Excess load	120%~180% of rated output power
		Protection mode: burp mode, automatically recovered after load anomalies are removed
	overvoltage	110%~140% of the rated output voltage
		Turn off the output voltage and restart to restore
Environment	Operating temperature		-10 ~ +50ºC (Please refer to "Decrement curve")
	operating humidity		20 ~ 90% RH, non-condensing
	Store temperature and humidity		-20 ~ +85ºC, 10 ~ 95% RH, non-condensing
	Temperature coefficient		±0.03% /ºC (0 ~ 40ºC)
	Vibration resistance	10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each
Safety and electromagnetic compatibility	Safety specification		passed GB4943 , GB4706, IEC61558,EN61000-3
	Withstand voltage		I/P-O/P: 3000VAC
	Insulation impedance		I/P-O/P:10M Ohms / 500VDC / 25ºC/ 70% RH
	Electromagnetic compatibility generator shoot		Parameter	Standard	Test Level / Note
			Conducted emission	GB17625.1,EN55032	Class B
			Radiated emission	GB/T-9254, EN55024, GB4343, FCC Part 15	Class B
Others	quality guanrantee period		2 years
	MTBF		≥45000 hours

Features of 60W Wall Mount over Ethernet Adapter POE Injector:
 

1. DEVICE INTERFACE: 1 x 2.5G LAN in port; 1 x 2.5G PoE++ out port.
2. COMPATIBILITY:Auto-sensing technology delivers up to 90W to a PoE++ device with backwards compatibility for 802.3bt(60w), 802.3at(30w) and 802.3af PoE (15.4W) devices.
3. POE++: The Gigabit PoE++ Injector converts a non-PoE gigabit port to a PoE++ Gigabit port and supplies PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) to a device.
4. POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables.
5. INSTALLATION FLEXIBILITY: Wall-mount design of the PoE++ injector and a sturdy Aluminum enclosure accommodates most installations scenarios.
6. EASY INSTALLATION: No configuration needed, simply connect a PoE network device to the Power over Ethernet injector.

Application of 60W Wall Mount over Ethernet Adapter POE Injector:

IP Phone, Voip Phone, Wireless Networks Access Points, IP print servers, Blue tooth access points , Security Cameras, smart door system, etc.

Detailed Photos