Wall Plug Power Over Ethernet Adapter 2*10/100Mbps 12W Poe RJ45 Injector

• Type: Injector
• Transmission Rate: >200Mbps
• Color: White
• Certification: ISO9001, RoHS, FCC, CE
• Transport Package: PE Bags
• Trademark: KaiWin
• Model NO.: KWZ244
• Origin: China
• Production Capacity: 100000pieces/Month

Product Description

   

Description:
 

1. Converts a Non-POE Port to a POE Port: the wall plug type POE injector provide max 24W power and 10/100Mbps data to POE devices by an Ethernet cable.
2. Multiple Applications: Compatible with most IP cameras, VoIP phones, wireless access points, wireless bridges and other POE devices.
3. Plug and Play: POE adapter is easy to install, no setup or configuration needed. With input AC 100-240V 0.8A and output 48V/0.5A.
4. Safe Protection: This POE power supply supports Over Current and Over Voltage protection, output current will be limited between 0.6-0.9A. And Short Circuit protection, it will be normal operation automatically while the short is removed.
5. Quiescent Consumption: The input power of POE adapter is less than 0.3 Watts at the input voltage range of 100V to 240V with no-load.

Product parameters of 2 port splitter POE injector Adapter:
 

Output	Safe type	GRT-POE06-120100	GRT-POE06-240050	GRT-POE06-120100A	GRT-POE06-240050A
	Dc voltage	12V	24V	12V	24V
	Rated current	1A	0.5A	1A	0.5A
	Rated power	12W	12W	12W	12W
	speed	Mbps	Mbps	Gbps	Gbps
	IEEE802.3	Non-standard	Non-standard	Non-standard	Non-standard
	Ripple/Noise	200mV p-p	240mVp-p	200mV p-p	240mVp-p
	Voltage accuracy	±5.0%	±5.0%	±5.0%	±3.0%
	Linear adjustment rate	±1.0%	±1.0%	±1.0%	±1.0%
	Load adjustment rate	±5.0%	±3.0%	±3.0%	±2.0%
	Start, rise, hold time	2000ms, 50ms, 10ms /230VAC 3000ms, 50ms, 10ms /115VAC (At full load)
Input	Voltage range	90 ~ 264VAC
	Frequency range		47 ~ 63Hz
	efficiency	84%	84%	84%	84%
	Alternating current	0.8A / 115VAC    0.4A / 230VAC
	Inrush current max.	Cold start 40A / 115VAC    75A / 230VAC
	Leakage current max.	0.25mA / 240VAC
Protect	Excess load	120%~180% of rated output power
		Protection mode: burp mode, automatically recovered after load anomalies are removed
	overvoltage	110%~140% of the rated output voltage
		Turn off the output voltage and restart to restore
Environment	Operating temperature		-10 ~ +50ºC (Please refer to "Decrement curve")
	operating humidity		20 ~ 90% RH, non-condensing
	Store temperature and humidity		-20 ~ +85ºC, 10 ~ 95% RH, non-condensing
	Temperature coefficient		±0.03% /ºC (0 ~ 40ºC)
	Vibration resistance	10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each
Safety and electromagnetic compatibility	Safety specification		passed GB4943 , GB4706, IEC61558,EN61000-3
	Withstand voltage		I/P-O/P: 3000VAC
	Insulation impedance		I/P-O/P:10M Ohms / 500VDC / 25ºC/ 70% RH
	Electromagnetic compatibility generator shoot		Parameter	Standard	Test Level / Note
			Conducted emission	GB17625.1,EN55032	Class B
			Radiated emission	GB/T-9254, EN55024, GB4343, FCC Part 15	Class B
Others	quality guanrantee period		2 years
	MTBF		≥45000 hours

Features of 2 port splitter POE injector Adapter:

Input: 100-240VAC 50/60Hz
Output: 48V 0.5A/24V 1A/12V 2A
Output type: 1*RJ45 connector--POE, 1*RJ45 connector--LAN
Output Power: 12W max
Material: Plastic
Certification: CE

Application of 2 port splitter POE injector Adapter:

This POE Injector can be used to connect a wireless AP, IP phone, network camera, or any 10/100Mbps powered device to a LAN switch. Extend the network and power to areas where no power cords or outlets by using existing Ethernet cable.
 

Detailed Photos