24W Wall Mount Over Ethernet Adapter Poe Injector

• Customization: Available
• Type: Injector
• Transmission Rate: >200Mbps
• Model NO.: KWZ246
• Color: Black
• Certification: ISO9001, RoHS, FCC, CE
• Transport Package: PE Bags
• Trademark: KaiWin
• Origin: China
• Production Capacity: 100000pieces/Month

Product Description

Description:

The PoE injector is a device that allows you to combine power and network connectivity to your PoE enabled devices using the same Cat5/5e or Cat6 twisted pair cable.
 

Product parameters of 24W Wall Mount over Ethernet Adapter POE Injector:

Output	Safe type	GRT-POE20-XXXYYY(A)	GRT-POE20-XXXYYY(A)	GRT-POE20-XXXYYYA-AF	GRT-POE20-XXXYYYA-AT
	Voltage range	12V~56Vdc	18V,24V,48V,56V	48~56VDC	48~56VDC
	Maximum power	12W	24W	15.4W	24W
	speed	Mbps   Gbps	Mbps   Gbps	Gbps	Gbps
	IEEE802.3	Non-standard, no active detection	Non-standard, no active detection	Standard, active detection of 802.3AF	Standard, active detection of 802.3AF
	Voltage accuracy	±5.0%	±5.0%	±5.0%	±3.0%
	Linear adjustment rate	±1.0%	±1.0%	±1.0%	±1.0%
	Load adjustment rate	±5.0%	±3.0%	±3.0%	±2.0%
	Start, rise, hold time	2000ms, 50ms, 10ms /230VAC 3000ms, 50ms, 10ms /115VAC (At full load)
Input	Voltage range	90 ~ 264VAC
	Frequency range		47 ~ 63Hz
	efficiency	85%	85%	85%	85%
	Alternating current	0.8A / 115VAC 0.4A / 230VAC
	Inrush current max.	Cold start 40A / 115VAC 75A / 230VAC
	Leakage current max.	0.25mA / 240VAC
Protect	Excess load	120%~180% of rated output power
		Protection mode: burp mode, automatically recovered after load anomalies are removed
	overvoltage	110%~140% of the rated output voltage
		Turn off the output voltage and restart to restore
Environment	Operating temperature		-10 ~ +50ºC (Please refer to "Decrement curve")
	operating humidity		20 ~ 90% RH, non-condensing
	Store temperature and humidity		-20 ~ +85ºC, 10 ~ 95% RH, non-condensing
	Temperature coefficient		±0.03% /ºC (0 ~ 40ºC)
	Vibration resistance	10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each
Safety and electromagnetic compatibility	Safety specification		passed GB4943 , GB4706, IEC61558,EN61000-3
	Withstand voltage		I/P-O/P: 3000VAC
	Insulation impedance		I/P-O/P:10M Ohms / 500VDC / 25ºC/ 70% RH
	Electromagnetic compatibility generator shoot		Parameter	Standard	Test Level / Note
			Conducted emission	GB17625.1,EN55032	Class B
			Radiated emission	GB/T-9254, EN55024, GB4343, FCC Part 15	Class B
Others	quality guanrantee period		2 years
	MTBF		≥45000 hours

Features of 24W Wall Mount over Ethernet Adapter POE Injector:

Rated operating voltage 100Vac to 240Vac input AC voltage.
Input rated AC voltage frequency range 50Hz or 60Hz and single phase.
The rated output voltage is specified at 48V±5%.
The output current will be performed from 320mA.
This adaptor is capable to support 24Watts continuously at all specified conditions.

Application of 24W Wall Mount over Ethernet Adapter POE Injector:

This POE Injector can be used to connect a wireless AP, IP phone, network camera, or any 10/100Mbps powered device to a LAN switch. Extend the network and power to areas where no power cords or outlets by using existing Ethernet cable.
 

Detailed Photos